Casa / GM Steering Knuckle / Fabricante de alumínio de qualidade superior

Fabricante de alumínio de qualidade superior

Algo parecido.: Administração

Kofuji.: Lz-ty324

Tráfego: Mil Meses

Cor: Logótipo Preto Ou Branco

Etiquetas: Preço do nó nó de direcção do alumínio

PEDIR UM POUCO

Detalhe

Porto:Xangai ou Ningbo

Quota mínima de partida:7.

Projectos especiais:Alumínio

Modelo:Visualização

Descrição do Produto
The aluminum steering knuckle is one of the important parts in the steering axle of the Buick Envision car, which can make the car run stably and sensitively transmit the driving direction. The function of the steering knuckle is to transmit and bear the front load of the car, support and drive the front wheel to rotate around the king pin to turn the car. In the driving state of the car, it is subjected to variable impact loads, therefore, it is required to have high strength. The steering knuckle is the hinge for turning the wheels, and is generally fork-shaped. The upper and lower forks have two coaxial holes for installing the kingpin, and the steering knuckle journal is used to install the wheel. The two lugs of the pin hole on the steering knuckle are connected with the fist-shaped parts at both ends of the front axle through the king pin, so that the front wheel can deflect a certain angle around the king pin to turn the car. In order to reduce wear, a bronze bushing is pressed into the steering knuckle pin hole, and the bushing is lubricated by the grease nipple installed on the steering knuckle. In order to make the steering flexible, a bearing is installed between the lower ear of the steering knuckle and the fist part of the front axle. An adjustment pad is also installed between the upper ear of the new steering knuckle and the fist-shaped part to adjust the gap therebetween.